Jaringan Ad hoc

Jaringan wireless ad hoc sangat cocok dilakukan pada saat saat penting untuk menghubungkan dua buah laptop atau lebih secara langsung tanpa membutuhkan peralatan tambahan seperti wireless router atau access point. Tidak hanya untuk keperluan File Sharing, bisa juga untuk share koneksi internet lho.

Konfigurasi yang dibutuhkan tidaklah rumit. Untuk membuat jaringan wireless ad hoc, tiap wireless adapter cukup di setting menjadi Mode Ad Hoc (mode standart adalah infrastructure mode).

OS : Windows XP

Cara mensetting laptop utama. - Klik Start> Control Panel> Network Connections. - Klik kanan pada wireless network connection, lalu klik Properties

- Pada Wireless Network Connection Properties, klik tab Wireless Networks - Klik Add pada bagian Preferred networks

- Selanjutnya isilah Network Name (SSID) untuk jaringan yang akan anda buat - Jangan lupa untuk mencentang check box This is a computer-to-computer (ad hoc)network: wireless access point are not used - Anda juga dapat membubuhkan WEP Password agar koneksi anda aman.



- Klik OK dan OK lagi untuk menyimpan konfigurasi anda.

Cara mensetting laptop lainnya.
Windows XP otomatis akan mendeteksi jika ada Wireless Network yang aktif



- Klik kanan pada icon Wireless Network yang berada pada taskbar, lalu klik View Available Wireless Networks.



- Wireless Network Connection akan menampilkan list SSID wireless anda. Klik SSID wireless anda lalu klik Connect.



Jika pada laptop utama ada anda bubuhkan WEP Password maka windows XP meminta anda untuk mengisi password sebelum anda terkoneksi ke jaringan ad hoc anda.

Introduction

ThinApp is an application that can be used to make some applications portable for the user. But you should make this procedure only with applications that have not already been installed on your computer.

• In this tutorial we will learn how an application with ThinApp.
• We will demonstrate with TuneUp Utilities 2009.
• ThinApp is supported Windows Seven since version 4.0.4.

How to proceed

• Step 1: Go to theStart button and select All Programs , and then choose VMWARE before going on the "ThinApp Setup Capture" shortcut.

• Step 2: When the ThinApp Setup Capture window pops up, click on"Next".

• Step 3: Close all the applications that can halt the process as well as the application that you want to make portable. When done, click Next.

• Step 4: The application will scan for the files required and may take some time. Do not touch anything while this process has started, it will let you know automatically when done.

• Step 5: When it has finished, minimize the ThinApp window as indicated on the screen.

• Step 6: You can now install the application that you want to make portable (for this example we have used Tune Up Utilities, available through the link: http://en.kioskea.net/telecharger/telecharger 1448 tuneup utilities )

• Step 7: if the application requires the serial number in order to run, enter it to validate the software. Do not forget to configure the software before proceeding to the next step.

• Step 8: When the installation is done maximize the ThinApp window and click on Next to analyse once more your system.

Compilation

• The analysis of the system will determine which folders and files are needed for the installation of the software to be able to create a portable version of it.
• Step 9: When the User-accessible entry points window pop ups, check the software that need to be made portable and when this is done, you can now click Next

• Step 10: You can now choose the flash disk device where you want the application to run in and click Next when done.

• Step 11: Leave the Merged isolation mode checked and click Next .

• Step 12: Choose the Fast Compression option to get the maximum space that will be required on the flash disk. Click on Next.

• Step 13: The folders that will be needed by the application will hence be located in the same directory.

• Step 14: When the previous step is over, you can now click on Build Now to make a whole folder on the file contents needed to execute the portable application.

• Step 15: You must now choose the Browse Project option to get hold of the folder made specially for the portable software.

• Step 16: Browse for the Bin folder and double click on its icon to open it.

• Step 17: The last step left is to copy the executable application on your flash disk and you are done!